HP Pro 2110 Small Form Factor User Manual

DIMM Socket Locations – HP Pro 3120
When installing memory modules:
●
If installing only one memory module, install it in DIMM1.
●
If installing 2 memory modules:
◦
2 matching memory modules - install in DIMM1 and DIMM3.
◦
2 non-matching memory modules - install in DIMM1 and DIMM3. Install the larger (GB)
module in DIMM1 and smaller (MB) module in DIMM3.
●
If installing 3 memory modules:
◦
3 matching memory modules - install in DIMM1, DIMM3, and DIMM2.
◦
2 matching memory modules and 1 non-matching memory module of smaller size (MB) than
combined matching modules (example: 2x2GB and 1x1GB) - install the matching pair in
DIMM1 and DIMM2 and smaller (MB) module in DIMM2.
●
If installing 4 memory modules:
◦
4 matching memory modules - install in DIMM1, DIMM3, DIMM2, and DIMM4.
◦
3 matching memory modules and 1 non-matching memory module of smaller size (MB) than
combined matching modules (example: 3x2GB & 1x1GB) -install the matching pair in
DIMM2, DIMM4, and DIMM1 and smaller (MB) module in DIMM3.
Figure 6-4 DIMM Socket Locations – HP Pro 3120
92 Chapter 6 Removal and Replacement Procedures Small Form Factor (SFF) Chassis

HP Pro 2110 Small Form Factor Specifications

General

Brand	HP
Model	Pro 2110 Small Form Factor
Category	Desktop
Language	English