Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-10 Computer Setup—Power
Option Description
After AC Power
Failure
Allows you to select system restart behavior after power loss:
●
Auto
●
Power On
●
Stay Off (default)
XD (Execute Disable)
(if supported by
hardware)
Allows you to disable/enable the processor's XD feature. Default is enabled.
Virtualization
Technology
Allows you to enable/disable the processor's Virtualization Technology feature. Default is disabled.
WOL in S5
Disables/enables limited Wake on LAN from S5. Note that the computer can only wake from S5
during a normal shutdown event. Default is disabled.
HP Pro 3120 – Computer Setup (F10) Utilities
15
To Next Page
Loading...
Need help?
General