Bottom
NOTE: Your computer may look slightly different from the illustration in this section.
Component Description
(1)
Battery and service door release latches ● Release the battery from the battery bay by sliding
the release latches one time.
●
When the battery has been removed from the battery
bay, release the service door from the computer by
sliding the release latches a second time.
(2) Battery bay Holds the battery.
(3)
Service door Protects the hard drive bay, the wireless LAN (WLAN)
module slot, and the memory module slots.
CAUTION: To prevent an unresponsive system, replace
the wireless module only with a wireless module
authorized for use in the computer by the governmental
agency that regulates wireless devices in your country or
region. If you replace the module and then receive a
warning message, remove the module to restore computer
functionality, and then contact support.
Windows 7: Contact is made through Help and Support.
Windows 8: Contact is made through Help and Support.
From the Start screen, type help, and then select Help
and Support.
SUSE Linux: Contact is made through Linux Help
(4) Vents (2) Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
Bottom 15
To Next Page
Loading...
Need help?
General
