HP ProCurve 1810G-8 User Manual

2-1
2
Installing the Switch
The ProCurve 1810G-8 Switch device is easy to install. It comes with an
accessory kit that includes the brackets for mounting the switch in a standard
19-inch telco rack, in an equipment cabinet, and with rubber feet that can be
attached so the switch can be securely located on a horizontal surface. The
brackets are designed to allow mounting the switch in a variety of locations
and orientations. This chapter shows how to install the switch.
Included Parts
The following components ship with a ProCurve 1810G-8 Switch:
■ Documentation kit
■ Screw/anchor and cable tie kit (5070-6571)
■ Four rubber feet
■ Universal AC power adapter (5188-6700)
■ Power cord for AC power adapter, one of the following:
• Read Me First
• HP ProCurve 1810G-8 Switch Quick Setup Guide
• Safety and Regulatory information
• Software License, Warranty, and Support information
• three 3/4” (20-mm M4) screws for wall and under-table mounting
• three wall anchors
• cable tie for power cord
Australia/New Zealand
Thailand
China
Continental Europe/Denmark/Switzerland/
Israel/Vietnam/Indonesia
India
Japan
South Africa
Taiwan
United Kingdom/Hong Kong/Singapore/
Malaysia
United States/Canada/Mexico
8121-0870
8121-0664
8120-8373
8120-6314
8121-0702
8120-6316
8120-6317
8121-0963
8120-8699
8120-6313

HP ProCurve 1810G-8 Specifications

General

Brand	HP
Model	ProCurve 1810G-8
Category	Switch
Language	English