HP ProCurve 2810 Series Access Security Guide

6-21
Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
Figure 6-11. Configuring for SSH Access Requiring a Client Public-Key Match and Manager Passwords
Figure 6-12 shows how to check the results of the above commands.
Figure 6-12. SSH Configuration and Client-Public-Key Listing From Figure 6-11
Configures Manager user-
name and password.
Configures the
switch to allow
SSH access only a
client whose
public key
matches one of the
keys in the public
key file
Configures the primary and
secondary password methods for
Manager (enable) access. (Becomes
available after SSH access is granted
Copies a public key file
named "Client-Keys.pub"
into the switch.
Lists the current SSH
authentication
configuration.
Shows the contents of
the public key file
downloaded with the
copy tftp command in
figure 6-11. In this
example, the file
contains two client
public-keys.
Client Key Index Number

HP ProCurve 2810 Series Specifications

General

Brand	HP
Model	ProCurve 2810 Series
Category	Switch
Language	English