HP ProCurve 2810 Series User Manual

Monitoring and Analyzing Switch Operation
Contents
Port and Static Trunk Monitoring Features . . . . . . . . . . . . . . . . . . . . . . . B-24
Menu: Configuring Port and Static Trunk Monitoring . . . . . . . . . . . B-25
CLI: Configuring Port and Static Trunk Monitoring . . . . . . . . . . . . . B-27
Web: Configuring Port Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . B-29
Locating a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-29
B-2

HP ProCurve 2810 Series Specifications

General

Jumbo Frame Support	Yes
Model	HP ProCurve 2810 Series
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP (mini-GBIC) slots
Forwarding Rate	71.4 Mpps
Layer	Layer 2
Management	Web, SNMP, CLI
MAC Address Table Size	16000 entries
Routing Protocol	Static IP routing
Form Factor	Rack-mountable
Power Consumption	48W (24-port)
Operating Temperature	32°F to 0°F (0°C to 0°C)
Operating Humidity	15% to 95% non-condensing
Power Supply	Internal power supply