HP ProCurve 2810 Series User Manual

MAC Address Management
Viewing the MAC Addresses of Connected Devices
Viewing the MAC Addresses of
Connected Devices
Syntax:
show mac-address [ mac-addr ]
Lists the MAC addresses of the devices the switch has
detected, along with the number of the specific port on
which each MAC address was detected.
[ port-list ]
Lists the MAC addresses of the devices the switch has
detected, on the specified port(s).
[ mac-addr ]
Lists the port on which the switch detects the specified
MAC address. Returns the following message if the
specified MAC address is not detected on any port in the
switch:
MAC address < mac-addr > not found.
[ vlan < vid > ]
Lists the MAC addresses of the devices the switch has
detected on ports belonging to the specified VLAN, along
with the number of the specific port on which each MAC
address was detected.
D-6

HP ProCurve 2810 Series Specifications

General

Jumbo Frame Support	Yes
Model	HP ProCurve 2810 Series
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP (mini-GBIC) slots
Forwarding Rate	71.4 Mpps
Layer	Layer 2
Management	Web, SNMP, CLI
MAC Address Table Size	16000 entries
Routing Protocol	Static IP routing
Form Factor	Rack-mountable
Power Consumption	48W (24-port)
Operating Temperature	32°F to 0°F (0°C to 0°C)
Operating Humidity	15% to 95% non-condensing
Power Supply	Internal power supply