HP ProCurve Switch yl 10-GbE 2-Port CX4 + 2-Port X2 Module (J8694A)
Description
This 10-GbE line interface module has two fixed CX4 ports and two X2 slots and is supported in both models
of the HP ProCurve Switch 3500yl series and also the HP ProCurve Switch 6200yl-24G-mGBIC.
Ports
2 open X2 transceiver slots
2 10-Gigabit Ethernet ports (IEEE 802.3ak Type 10Gbase-CX4)
Duplex: full
Transceivers supported (ordered separately)
•J8437AHPProCurve10-GbEX2-SCLROptic
•J8436AHPProCurve10-GbEX2-SCSROptic
•J8438AHPProCurve10-GbEX2-SCEROptic
•J9144AHPProCurve10-GbEX2-SCLRMOptic
•J8439AHPProCurve10-GbECX4MediaConverter
•J8440AHPProCurve10-GbEX2-CX4Transceiver
NOTE
Only the two fixed CX4 ports on this module support the HP ProCurve 10-GbE CX4 Media Converter (J8439A).
HP ProCurve Switch 6200yl
The HP ProCurve Switch 6200yl-24G-mGBIC is an advanced Layer 3 stackable in 1U height. It has 24 mini-
GBIC slots and an expansion slot for an optional 4-port 10-GbE module. Designed to be deployed as an
aggregator of traffic from the edge to the core of the network, this switch supports a variety of Gigabit mini-
GBICs, such as SX, LX, LH, and 1000Base-T.
The Switch 6200yl has the same features as the 5400zl and 3500 series switches, but it comes standard with
Premium License features. Thus, the routing protocols are already available as part of the aggregator switch use
model.
Like the HP ProCurve Switch 5400zl and 3500 series, the foundation for this switch is a purpose-built ProVision
ASIC that allows the most demanding networking features, such as QoS and security, to be implemented in a
scalable yet granular fashion.
With its high-performance architecture, 10-GbE capability, and programmable ASIC, the HP ProCurve Switch
6200yl-24G-mGBIC offers excellent investment protection, flexibility, and scalability.
The HP ProCurve 620 Redundant/External Power Supply can be used to supply RPS power to the Switch
6200yl for high-availability environments.
41
To Next Page
Loading...
Need help?
General