HP ProLiant DL320 User Manual

19
Server operations
In this section
Powering up the server .................................................................................................................19
Powering down the server ............................................................................................................19
Preparation procedures .................................................................................................................20
Extending the server from the rack...............................................................................................21
Removing the access panel...........................................................................................................21
Installing the access panel ............................................................................................................22
Removing the PCI riser board assembly ......................................................................................22
Installing PCI riser board assembly..............................................................................................23
Removing the hot-plug SATA backplane.....................................................................................24
Removing the fan assembly..........................................................................................................25
Installing the fan assembly ...........................................................................................................26
Powering up the server
To power up the server, press the Power On/Standby button.
Powering down the server
WARNING: To reduce the risk of personal injury, electric
shock, or damage to the equipment, remove the power cord to
remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the
power supply and some internal circuitry remain active until AC
power is removed.
IMPORTANT: If installing a hot-plug device, it is not necessary to
power down the server.
1. Back up the server data.
2. Shut down the operating system as directed by the operating system
documentation.

HP ProLiant DL320 Specifications

General

Product Line	ProLiant
CPU Type	Intel Xeon
Storage	Up to 4 LFF (3.5") or 8 SFF (2.5") SAS/SATA/SSD drives (depending on model and configuration)
Network	Embedded 1GbE
Power Supply	Single or Redundant Power Supplies (depending on model and configuration)
Form Factor	1U
Server Type	Rack Server