HP ProLiant DL320 User Manual

Hardware options installation 43
Installing the CD-ROM drive assembly
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all bays are populated with either a
component or a blank.
NOTE: The server supports slimline optical devices, including CD-ROM
and DVD-ROM.
1. Access the internal server components ("Preparation procedures" on page
20
).
2. Remove the fan assembly ("Removing the fan assembly" on page 25
).
3. Remove the optical drive assembly by loosening the thumbscrew and sliding
the cage out.

HP ProLiant DL320 Specifications

General

Product Line	ProLiant
CPU Type	Intel Xeon
Storage	Up to 4 LFF (3.5") or 8 SFF (2.5") SAS/SATA/SSD drives (depending on model and configuration)
Network	Embedded 1GbE
Power Supply	Single or Redundant Power Supplies (depending on model and configuration)
Form Factor	1U
Server Type	Rack Server