HP ProLiant DL585 User Manual

System battery
C-2 HP ProLiant DL585 Server User Guide
Figure C-1: Battery location on the system board
5. Remove the existing battery.
Figure C-2: Removing a battery

HP ProLiant DL585 Specifications

General

Brand	HP
Model	ProLiant DL585
Category	Server
Language	English

Summary

About This Guide

Important safety information

Essential guidelines for safe installation and handling of the server to prevent injury.

Technical support

Information on how to get help and what details to provide when contacting HP support.

Chapter 2 Server operations

Powering up the server

Step-by-step instructions for turning on the server, including button usage.

Powering down the server

Procedures for safely shutting down the server, including warnings about residual power.

Extending the server from the rack

Steps to safely pull the server out of the rack for maintenance or access.

Removing the access panel

Instructions for opening the server chassis by removing the access panel.

Chapter 3 Server setup

Power requirements

Guidelines for electrical connections, circuit loading, and grounding for safe operation.

Grounding requirements

Procedures and standards for properly grounding the server to prevent static discharge and ensure safety.

Installing the server into the rack

Detailed steps for mounting the server securely into a standard or telco rack.

Connecting the power cord and peripheral devices

Guide to connecting power cords and essential peripheral devices to the server's rear panel.

Chapter 4 Installing hardware options

Processor memory boards

Information on supported memory types, installation guidelines, and population rules for memory boards.

Hot-plug power supplies

Procedures for installing and replacing redundant hot-plug power supplies for continuous operation.

PCI-X expansion boards

Details on PCI-X slots, bus speeds, and guidelines for installing expansion boards.

Chapter 5 Server Configuration and Utilities

ROM-Based Setup Utility

Overview of the RBSU for configuring server hardware settings and preparing for OS installation.

Navigating RBSU

Instructions on using keyboard keys to navigate and interact with the RBSU menus.

System options

Configuration settings within RBSU for OS selection, COM ports, and other system parameters.

Appendix H Troubleshooting

If the server does not start

Initial troubleshooting steps for common POST failures and power-on issues.

Diagnostic steps

A guided process to diagnose system power and POST issues based on LED status.

Problems after initial boot

Solutions for errors encountered after the server passes POST, including OS loading issues.