HP s300 User Manual

45
Setting the AF Area
AF stands for Automatic Focus. This feature determines the
area on which the camera focuses.
To set AF Area
From the Record menu, select AF Area.1.
Use the 2.
or keys to go through the selection.
Press the 3. OK button to save and apply changes.
The table below shows the available AF area settings.
Icon Item Description
Wide The camera automatically selects focus area within the wide frame.
Center The focus area is fixed on the center.
Setting the AF Lamp
The AF Lamp function allows you to record images even low light
conditions.
If AF Lamp is set to Auto, the AF lamp located in the front of the
camera, see “Front View” on page 10, emits an red light by half
pressing the Shutter button allowing the camera to focus easily.
To set AF Lamp
From the Record menu, select AF Lamp.1.
Use the 2.
or keys to go through the selection.
Press the 3. OK button to save and apply changes.
Setting Sharpness
This function allows you to enhance or soften finer details of your
photos.
To set Sharpness
From the Record menu, select 1. Sharpness.
Use the 2.
or keys to go through the selection.
Press the 3. OK button
to save and apply changes.

HP s300 Specifications

Camera Sensor

sensor type	1/2.3” CCD
total pixels	14.5 MP (4440 x 3274)
effective pixels	14.2 MP (4368 x 3256)

Display

screen size	2.7 inches

Zoom

optical zoom	4X
digital zoom	5X

Power

battery type	Li-ion battery

Weight and Dimensions

dimensions	98 x 53 x 19 mm (3.9 x 2.0 x 0.7 in)
weight without battery	100 g (0.22 lb)