HP s300 User Manual

65
Using the Setup Menu
You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows to configure general camera settings.
To go to Setup Menu:
Press 1. Menu button
to launch the Record/Playback
Menu.
Use the 2.
or keys to switch the menu tab along the top of the
display to Setup
menu.
Use the 3.
or keys to move through the menu selections.
To select an item, press the 4. OK button
or key.
Change the submenu settings using the 4-way navigation control.5.
Press the 6. OK button to save and apply settings.
Setting Sounds
Use the Sound menu functions to control the sounds produced by the camera.
From the Setup menu, select 1. Sounds.
Adjusts sound settings.2.
Press the 3. OK button
to apply changes.
Item Available Settings Description
Startup Sound 1, Sound 2, Sound 3, Off Selects the startup sound when camera is turned on.
Shutter On, Off
Enables or disables shutter sound when Shutter button is pressed.
Shutter sound is not available when recording movies or voice
clips.
Beep
Volume
0-4 Adjusts volume.

HP s300 Specifications

Camera Sensor

sensor type	1/2.3” CCD
total pixels	14.5 MP (4440 x 3274)
effective pixels	14.2 MP (4368 x 3256)

Display

screen size	2.7 inches

Zoom

optical zoom	4X
digital zoom	5X

Power

battery type	Li-ion battery

Weight and Dimensions

dimensions	98 x 53 x 19 mm (3.9 x 2.0 x 0.7 in)
weight without battery	100 g (0.22 lb)