Huawei ATN 905 User Manual

l 10GE optical interfaces match 10GE optical modules.
NOTE
In most cases, an optical or electrical module can be used at an optical interface if its packaging and service
rate can match the interface. Some boards do not support electrical modules. For information about the
modules that a board supports, see the Functions and Features topic for the board.
4.3.2 Technical Specifications
This section describes technical specifications of the swappable optical/electrical module on the
ATN 905.
FE Optical Module
Table 4-16 describes technical specifications of the interface on the FE optical module.
Table 4-16 Technical specifications of the FE optical interface
Item Specification
Optical interface
type
Two-fiber bidirectional interface
100BASE-FX
(15 km)
100BASE-FX
(40 km)
100BASE-FX
(80 km)
Encapsulation type eSFP eSFP eSFP
Fiber type Single-mode Single-mode Single-mode
Working wavelength
range (nm)
1261 to 1360 1263 to 1360 1480 to 1580
Mean launched
optical power (dBm)
-15 to -8 -5 to 0 -5 to 0
Receiving sensitivity
(dBm)
-28 -34 -34
Minimum overload
(dBm)
-8 -10 -10
Minimum extinction
ratio (dB)
8.2 10 10
Optical module code S4015755 S4015715 34060282
FE Optical Module (industry)
The ATN 905 supports use in the range of -40°C to 65°C only if industrial optical modules are
used.
Table 4-17 describes technical specifications of the interface on the FE optical module.
ATN 905 Multi-service Access Equipment
Product Description 4 Hardware Structure
Issue 01 (2013-05-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
43

Huawei ATN 905 Specifications

General

Brand	Huawei
Model	ATN 905
Category	Wireless Access Point
Language	English