FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
The indicator blinks at super short
intervals for 0.5s (blinking at 10 Hz,
on for 0.05s and then off for 0.05s)
and then turns off for 0.5s. The
cycle lasts for 10s.
A system failure alarm is generated.
No system alarm is generated.
Wireless
communication
status indicator
No network parameters exist, or a
network is to be created.
Blinking at
long intervals
A network is set up, and no node
access is allowed (the indicator
blinks at 0.5 Hz, on for 1s and then
off for 1s).
Blinking at
super short
intervals
A network is set up, and node
access is allowed (the indicator
blinks at 10 Hz, on for 0.05s and
then off for 0.05s).
Blinking
intermittently
at super short
intervals
The access actuator is searching for
a network (the indicator blinks at
super short intervals for 0.5s and
then turns off for 0.5s).
Communications Ports
The access actuator provides one DO port (LOCK/GND) and one DI port (GATE/GND).
Table 3-51 lists the LOCK/GND/GATE/GND port pin definitions.
Table 3-51 LOCK/GND/GATE/GND port pin definitions
LOCK/GND
(control
magnetic
locks) pin
sequence
GATE/GND
(door status)
pin sequence
To Next Page
Loading...
Need help?
General
