Huawei FusionModule5000 User Manual

When the TE30 is connected to the router, the status of that router changes to .
----End
Setting Wi-Fi Hotspot Parameters
When the Wi-Fi hotspot function is enabled, other devices can access a Wi-Fi network by
connecting to the TE30.
Step 1 Choose Advanced Settings > Settings > Network > Wi-Fi > Wi-Fi Hotspot. Select Enable
for the Wi-Fi Hotspot parameter.
Step 2 Select Advanced Settings. On the displayed Advanced Wireless Settings screen, set the
advanced wireless network parameters by referring to Table 3-4.
Table 3-4 Advanced wireless network parameters
Parameter Description Setting
SSID
Number
Specifies the name of your TE30's Wi-Fi
network.
This parameter is mandatory.
The value is a string of 1 to 31
characters, consisting of digits,
letters, and special characters,
such as @ # %.
Channel Specifies a channel that transmits data
through Wi-Fi signals.
If you select AUTO, your TE30
automatically selects the optimal channel.
The default value is AUTO.
Retain the default value.
Protocol Specifies the standard used on the Wi-Fi
network.
l 802.11b: This standard works in the
2.4 GHz band and delivers a maximum
data transmission rate of 300 Mbit/s.
l 802.11g: This standard works in the
2.4 GHz band and delivers a maximum
data transmission rate of 54 Mbit/s.
l 802.11n: This standard works in the
2.4 GHz band and delivers a maximum
data transmission rate of 300 Mbit/s.
l 802.11b/g/n: 802.11b, 802.11g, and
802.11n are all supported.
The default value is 802.11b/g/
n.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 3 Network
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21

Huawei FusionModule5000 Specifications

General

Brand	Huawei
Model	FusionModule5000
Category	Wireless Router
Language	English