Operation Manual - Getting Started
Quidway S5000 Series Ethernet Switches Chapter 5 System IP Configuration
5-4
5.1.3 Static Route
A static route is a special route, which is manually configured by the network
administrator. The static route is applied in a comparatively simple network. The proper
configuration and usage of the static route can improve the network performance and
ensure the bandwidth of the important applications.
Huawei Layer 2 Series Ethernet Switches can be configured with static route, used for
login to the switch through the network.
5.2 System IP Configuration
System IP configuration includes:
z Create/Delete a Management VLAN Interface
z Assign/Delete IP Address for/of the Management VLAN Interface
z Set/Delete management VLAN interface description character string
z Enable/Disable management VLAN interface
z Configure Hostname and Host IP Address
z Configure a static route
z Configure the default preference of static routes
5.2.1 Create/Delete a Management VLAN Interface
Perform the following configuration in system view.
Table 5-2 Create/Delete a management VLAN interface
Operation Command
Create a management VLAN interface and enter its view interface vlan-interface vlan-id
Delete a management VLAN interface
undo interface vlan-interface vlan-id
Note that, user create a VLAN specified with the vlan-id parameter before perform this
configuration task. But VLAN1 is the default VLAN, which you need not create.
5.2.2 Assign/Delete IP Address for/of the Management VLAN Interface
You can use the following command to configure the IP address for the management
VLAN interface, thus to perform remote management such as Telnet and web
management to Ethernet Switch.
Perform the following configuration in VLAN interface view.
To Next Page
Loading...
Need help?
General