About This Document
Purpose
This document describes how to connect inverters to the FusionSolar Smart PV
Management System through the Smart Dongle. For details about the installation
of each device, see the corresponding user manual or quick guide. This document
describes only cable connections between devices, power-on commissioning, and
maintenance.
Intended Audience
This document is intended for photovoltaic (PV) plant operators and
qualied
electricians.
Symbol Conventions
The symbols that may be found in this document are dened as follows.
Symbol
Remarks
Indicates a hazard with a high level of risk
which, if not avoided, will result in death or
serious injury.
Indicates a hazard with a medium level of risk
which, if not avoided, could result in death or
serious injury.
Indicates a hazard with a low level of risk
which, if not avoided, could result in minor or
moderate injury.
Indicates a potentially hazardous situation
which, if not avoided, could result in
equipment damage, data loss, performance
deterioration, or unanticipated results.
NOTICE is used to address practices not related
to personal injury.
FusionSolar Smart PV Management System
Connection
User Manual (Inverters + SDongleA) About This Document
Issue 02 (2021-11-25) Copyright © Huawei Technologies Co., Ltd. ii
To Next Page
Loading...
Need help?
General