Type Parameter Setting Description
APN dialup number
● When APN mode is set to Manual, APN, APN dialup
number, APN user name, and APN user password
are all displayed and congurable. When APN mode
is set to Automatic, these parameters are not
displayed.
APN user name
APN user password
Network mode
PIN
Table 6-4 Description of icons
Icon SIM card Management system
Meani
ng
Enter the
PIN.
No SIM
card
Not connected; signal strength Connection
failed.
Connection
is
successful.
Icon N/A N/A
Meani
ng
Enter the
PUK.
Failed to
read the
card. The
signal is
poor or
the
subscriber
is in
arrears.
Connected; signal strength N/A N/A
----End
6.1.3 FE Communication Networking
Step 1 Run the FusionSolar app and go to the Device commissioning screen. (Perform
this step only for the FusionSolar app.)
FusionSolar Smart PV Management System
Connection
User Manual (Inverters + SDongleA) 6 Maintenance
Issue 02 (2021-11-25) Copyright © Huawei Technologies Co., Ltd. 53
To Next Page
Loading...
Need help?
General