5 Site Deployment and Commissioning
5.1 Creating a PV Plant
5.1.1 Creating a PV Plant over the App
Prerequisites
● You have downloaded and installed the FusionSolar app which can be
obtained by searching for FusionSolar in Huawei AppGallery or scanning the
QR code.
● The inverter is properly powered on and the Smart Dongle communicates
with the management system properly.
● You have obtained the login account and password from the installation
contractor or Huawei service engineer. If no account or password is available,
create an account.
● The latest app version is required for device commissioning. You can search for
FusionSolar in App Store or scanning the QR code to install the app for iOS.
● This section contains a large number of screenshots, which are only used to illustrate
the operation method. The PV plant, device model, and parameters in the
gures are for
reference only.
● The version of the FusionSolar app is 5.7.001. The actual screens may vary.
FusionSolar Smart PV Management System
Connection
User Manual (Inverters + SDongleA) 5 Site Deployment and Commissioning
Issue 02 (2021-11-25) Copyright © Huawei Technologies Co., Ltd. 25
To Next Page
Loading...
Need help?
General