Table 6-5 Parameter description
Type Parameter Setting Description
Inverter's
connection to
a router
DHCP ● Enable this parameter if you use the IP address
automatically allocated by the router. In this case, the
values of IP address, Subnet mask, Gateway, Primary
DNS server, and Secondary DNS server are
automatically allocated.
● Disable this parameter if you do not use the IP address
automatically allocated by the router. In this case, you
need to set the values of IP address, Subnet mask,
Gateway, Primary DNS server, and Secondary DNS
server.
IP address Species the IP address for the router to which the
inverter WLAN network connects. The IP address must be
in the same network segment as the router IP address.
Subnet mask Species the router subnet mask.
Gateway Species the router gateway address.
Primary DNS server Species the address for the primary domain name service
(DNS) server.
Secondary DNS
server
Species the address for the secondary DNS server.
Table 6-6 Description of icons
Icon
Router Management system
Meani
ng
Connection
failed.
Connecting
...
Connection is
successful.
Connection
failed.
Connection is
successful.
----End
6.2 Exporting Inverter and Smart Dongle Logs
Procedure
Step 1 Log in to the management system, click Settings in the upper-right corner to go
to the System Settings page, and choose Log Export.
FusionSolar Smart PV Management System
Connection
User Manual (Inverters + SDongleA) 6 Maintenance
Issue 02 (2021-11-25) Copyright © Huawei Technologies Co., Ltd. 56
To Next Page
Loading...
Need help?
General