Figure 5-18 Cable connection (4–8 mm two-hole rubber plug)
● If three communications cables are to be connected, use the three-hole rubber
plug that is bound in the maintenance compartment.
● Block unused cable holes using plugs and tighten cable glands.
----End
5.9 Closing the Maintenance Compartment Door
Procedure
Step 1 Adjust the support bar, close the maintenance compartment door and tighten the
two screws on the door.
SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)
Series
User Manual 5 Electrical Connections
Issue 07 (2021-07-08) Copyright © Huawei Technologies Co., Ltd. 49
To Next Page
Loading...
Need help?
General