SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Handling the SUN2000L
9.1 Removing the SUN2000L
Procedure
Step 1 Power off the system by following the instructions in 6.3 Powering Off the System.
Step 2 Disconnect all cables from the SUN2000L, including signal cables, DC input power cables,
AC output power cables, and PE cables.
Step 3 Remove the WiFi antenna from the SUN2000L.
Step 4 Remove the SUN2000L from the mounting bracket.
Step 5 Remove the mounting bracket.
----End
9.2 Packing the SUN2000L
If the original packaging is available, put the SUN2000L inside it and then seal it using
adhesive tape.
If the original packaging is not available, put the SUN2000L inside a suitable cardboard
box and seal it properly.
9.3 Disposing of the SUN2000L
If the SUN2000L service life expires, dispose of it according to the local disposal rules for
electrical equipment and electronic component waste or return the SUN2000L to Huawei.
To Next Page
Loading...
Need help?
General