WA603DE & WA653DE
Fat AP Configuration Guide 4 Upgrade and Maintenance
Issue 02 (2012-04-19) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
25
Figure 4-4 Restoring the factory default settings
2. Click Reset now.
You are automatically logged out of the AP. After the reset is completed, the AP's factory
default settings are restored.
----End
4.4 Maintaining System Logs
4.4.1 Enabling the System Log Function
APs can send information about events and errors to a system log server. If there is a system
log server on the network, perform the following operations to enable the AP to send logs to
the log server:
1. Choose Administration > Log from the left navigation tree.
The page shown in Figure 4-5 is displayed.
To Next Page
Loading...
Need help?
General
