Installation and maintenance manual
H.I.B Hydac International Page 10 of 36
Version: G/DV
Date: 11.01.2023
4.1.2 Personal protective equipment (PPE)
Protective gloves, mechanical hazard (7010-M009) Protective gloves are
used to protect the hands from friction, grazing, piercing injuries or deeper
injuries and from making contact with hot surfaces.
Protective work clothing (7010-M010) Protective work clothing is tight-fitting
work clothing with low tearing strength, with tight sleeves and without any
protruding parts.
Safety goggles (7010-M004) Safety goggles serve to protect the eyes from
flying parts and spraying liquid.
Wear foot protection (7010-M008). The mandatory action signs label work
areas where suitable work protection shoes or boots must be worn.
4.2 Safety / Prevention of accidents
4.2.1 General notes
This installation and maintenance manual contains basic notes to be observed for startup,
operation and maintenance. Read before starting the unit without fail.
Commissioning refers to the initial use, as intended, of a device covered by the Machinery
Directive in the European Community, i.e. the time at which the device must be compliant with
the Machinery Directive and all other EU directives and EU regulations that apply to the device.
The manufacturer declines any responsibility for damage and breakdowns resulting from a
failure to observe this operating manual.
4.2.2 Observe regulatory information
Observe the following regulatory information and directives:
Legal and local regulations for accident prevention
Legal and local regulations for environmental protection
Country-specific regulations, organisation-specific regulations
To Next Page
Loading...
General