PARTS
7-12 powermax
45
Service Manual
Recommended spare parts
Hypertherm recommends that service centers keep the following spare parts on hand for repairs, either because these
parts are critical or because they are usually exposed to heavy and repeated wear. You may find that you need to revise
or expand this list for your customers, based on the particular conditions for your region and working environments.
Part number Description
Page
reference
228561 Kit: Ground clamp 7-2
228300 Kit: Work lead assembly, 6.1 m (20 feet) 7-2
228266 Kit: Powermax45 power switch, 200–240V CSA and 230V CE 7-4
228288 Kit: Powermax45 power switch, 400V CE and 480V CSA 7-4
228262 Kit: Control board, 200–240V CSA, 230V CE, 400V CE 7-4
428098 Kit: Control board, 480V CSA 7-4
228261 Kit: Power board, 200–240V CSA 7-4
428078 Kit: Power board, 480V CSA 7-4
228260 Kit: Power board, 400V CE 7-4
228259 Kit: Power board, 230V CE 7-4
228285 Kit: Solenoid valve 7-5
228287 Kit: Filter and regulator 7-5
228302 Kit: Air filter element 7-5
058503 O-ring: Viton 0.626 x 0.070 7-7
228313 Kit: T45v torch handle replacement 7-7
075714 T45v torch handle screws (5 required) 7-7
002244 T45v torch trigger assembly with spring 7-7
228109 Kit: T45v torch cap-sensor switch replacement 7-7
088008 T45v hand torch assembly with 6.1 m (20 feet) lead 7-7
088009 T45v hand torch assembly with 15.24m (50feet) lead 7-7
228315 Kit: T45v torch lead replacement, 6.1 m (20 feet) 7-7
228316 Kit: T45v torch lead replacement, 15.24m (50feet) 7-7
088010 T45m machine torch assembly with 7.62m (25feet) lead 7-9
088012 T45m machine torch assembly with 15.24m (50feet) lead 7-9
228228 Kit: T45m positioning sleeve 7-9
228229 Kit: T45m removable gear rack 7-9
228322 Kit: T45m front mounting ring 7-9
228323 Kit: T45m rear mounting ring 7-9
228321 Kit T45m cap-sensor switch replacement 7-9
228317 Kit: T45m torch lead replacement, 7.62m (25feet) 7-9
228319 Kit: T45m torch lead replacement, 15.24m (50feet) 7-9
To Next Page
Loading...
Need help?
General
