Hypertherm powermax900 User Manual

3-2
SETUP
Operator Manual
UPON RECEIPT
1. Verify that all parts and items on your order have been received. Alert your distributor if any
parts or items are damaged or missing.
2. Inspect the power supply for any physical damage that may have occurred during shipping. If
there is evidence of damage, refer to the
Claims section below.
All communications regarding this equipment must include the model number and serial number
located on the back of the Powermax900.
3. Before setting up and operating the Powermax900, read the Safety section of this manual.
CLAIMS
Claims for damage during shipment — If your unit was damaged during shipment, you must file a
claim with the carrier. Hypertherm will furnish you with a copy of the bill of lading upon request. If you
need additional assistance, call Customer Service listed in the front of this manual, or your authorized
Hypertherm distributor.
Claims for defective or missing merchandise — If any of the merchandise is defective or missing,
call your authorized Hypertherm distributor. If you need additional assistance, call Customer Service
listed in the front of this manual.

Hypertherm powermax900 Specifications

General

Brand	Hypertherm
Model	powermax900
Category	Welding System
Language	English