Hypertherm XPR170 User Manual

Installation
3
11 4 809480 Instruction Manual XPR300
b. Remove the insulator panel. Move the panel horizontally to remove it.
c. Connect the pilot arc lead.
d. Connect the coolant return hose (red) to the coolant return fitting (red).
e. Connect the coolant supply hose (green) to the coolant supply fitting (green).
f. Connect the water hose inside of the VWI or OptiMix console.
g. Remove the hose clamp from the lead and put
it into the groove on the console collar.
h. Push the coupler into the console collar and
tighten the clamp.
c
e
d
f
b
g
h

Hypertherm XPR170 Specifications

General

Brand	Hypertherm
Model	XPR170
Category	Welding System
Language	English