RF Data Modem HWC-M100 / HWC-W100 / HWC-W120
26
5.3 Status and Control of Master
In upper screen, please confirm whether the "state/control" is selected.
(If "status/control" is not selected, click the tab of "status/control")
The following is the status information of Master.
∎ System Type : Type of system.
∎ Version : Firmware version of Master
∎ Host Link : Network information to communicate with HOST.
These are network information of the Master.
∎ AP Link : Network information of communicate with AP.
(User do not need to set this information.)
∎ Range of EP : Number of EP that installed. (Only by range)
[Caution.1] When you want to see the status or control the value, "Network Polling" must
not be checked. GUI program requests the network device list when "Network Polling" is
checked and the status of selected device in other case, by periods.
[Caution.2] If you couldn't see the upper screen, please confirm whether you select
Master!
To Next Page
Loading...
General