DRIVING
SANTA FE
3433
HYUNDAI
The Forward Collision-Avoidance
Assist (FCA) system is designed to
detect and monitor the vehicle ahead
or detect a pedestrian in the roadway
and warn the driver if a collision is
imminent.
To operate the system, select the FCA
(Forward Collision Avoidance Assist)
sub menu in the LCD cluster display
under User Settings. Please refer to
your Owner’s Manual for further
information.
FORWARD COLLISION-AVOIDANCE ASSIST (FCA)
• To turn LKAS on,
press the LKAS switch.
• To turn LKAS off,
press the switch again.
The Lane Keeping Assist System
detects lane markers on the road,
and assists the driver’s steering to
help keep the vehicle between lanes.
LANE KEEPING ASSIST (LKA)
LKAS operates only when the vehicle
speed is above 38 mph and when the
LKAS indicator is green displayed in the
instrument cluster. LKAS will not operate
properly if the lane line is not clear, sharp
bend in the road, or in heavy fog.
Refer to the Owner's Manual for more
detailed information.
Note:
LKAS Settings can be
adjusted in the User Settings
page of the instrument cluster
under Driving Assist.
BLIND-SPOT COLLISION-AVOIDANCE ASSIST (BCA)
The Blind-Spot Collision-
Avoidance Assist (BCA) system
may apply braking power, when
an approaching vehicle is detected
within a certain distance next to or
behind your vehicle. The
instrument cluster will inform the
driver of activation. Press the Blind-
Spot switch. The indicator will
illuminate on the button. If vehicle
speed exceeds 9mph the system
will activate. Press the switch again
to deactivate the system.
Blind spot collision warning
(BCW)
Warning range is dependent on your
vehicle speed. Example, if your
vehicle speed is 9.3 mph greater
than other vehicles, the warning is
not active.
Blind spot collision avoidance
(BCA)
When changing lanes, the system
detects the front lane through the
camera installed on the windshield
and detects the side/rear areas
through radar sensors.
To Next Page
Loading...
Need help?
General
