DRIVING
SANTA FE
3635
HYUNDAI
REAR CROSS-TRAFFIC COLLISION-AVOIDANCE
ASSIST (RCCA)
The RCCA system uses radar sensors
to monitor approaching vehicles to the
left and right while your vehicle is in
reverse. If the risk of collision is
detected while the RCCW is generated,
brake is controlled. The instrument
cluster will inform the driver of the
brake control. If the rear view monitor
system is in activation, a message will
also appear on the audio or AVN
screen.
Activate/Deactivate
Select the following items on the
instrument cluster in order:
1. Select User Settings
2. Select Driver Assistance
3. Select Blind Spot Safety
4. Select Rear Cross Trafc Safety
SAFE EXIT ASSIST (SEA)
The Safe Exit Assist system helps prevent passengers from opening
the door when a vehicle is approaching from the rear area. After the
vehicle stops and an approaching vehicle from the rear area is
detected, the rear door does not open from the inside handle. A
“check surroundings then try again” warning message will appear on
the cluster and a warning sound will go off.
Activate/Deactivate
Select the following items on the
instrument cluster in order:
1. Select user settings mode in the
cluster LCD display
2. Select Driver Assistance
3. Select Blind-Spot Safety
4. Select Safe Exit Assistance
Note: If you press the child safety
switch located on the driver door within
10 seconds after the warning message
appears, the driver acknowledges the
rear status and the child safety lock is
canceled.
When an approaching vehicle from the
rear is detected and the door is already
opened, a “watch for trafc” warning
message appears and a warning
sound will go off.
To Next Page
Loading...
Need help?
General
