FEATURES AND CONTROLS
SANTA FE
0605
HYUNDAI
Sunshade
To open the sunshade, pull the
sunroof control lever lightly backward
to the first detent position.
Push the sunroof control lever
forward to close.
Tilting the Sunroof
SUNROOF
Sliding the Sunroof
Push the sunroof control lever
upward to tilt open the sunroof.
Push again the sunroof control lever
upward to tilt the sunroof glass
closed.
Pull and hold the sunroof control lever
backward to the first detent to open
the sunroof incrementally.
Pull the sunroof control lever
backward past the first detent to slide
open the sunroof completely.
Push the sunroof control lever forward
to the second detent position to close
sunroof glass with the sunshade.
Front map lamp
1
Press the lens to turn the map lamp on or
off.
Front door lamp ( )
2
Lights will turn on when any door is
open.
Front room lamp ( )
3
Push the switch to turn the room lamp on.
Front room lamp ( )
4
Push the switch to turn the room lamp off.
2
1 1
3
INTERIOR LIGHTS
POWER LIFTGATE BUTTON
HEAD-UP DISPLAY (HUD)
When the ignition is on and the
vehicle is in park, the power liftgate
can be opened by using the
console button on the dash. Before
using the power liftgate, make sure
it is selected in the User Setting
modes in the LCD display.
The Head-Up Display is an optional
feature that allows the driver to view
information projected onto a transparent
screen while driving.
To Activate:
Select “Head-Up Display on the User
Settings mode on the instrument cluster
LCD display and select “Enable Head-Up
Display”
To Activate:
User Settings → Door → Power Liftgate
Adjusting Speed:
The speed of the power liftgate can be adjusted in the User Settings
mode in the LCD display.
User Settings → Door → Power Liftgate Speed → Normal/Fast
Note: If you wear polarizing-filter sunglasses,
it’s difficult to read the Head Up Display
information.
To Next Page
Loading...
Need help?
General
