Hyundai SANTA FE 2020 User Manual

DRIVING
41
HYUNDAI
SANTA FE CUSTOMER DELIVERY CHECK LIST
HYUNDAI OWNER DEALERSHIP NAME
SALES CONSULTANT DATE
VIN PREVIOUS VEHICLE
SANTA FE
42
BLUETOOTH
®
HANDS-FREE
SWITCHING BETWEEN PAIRED PHONES
On the radio:
1. Push the SETUP button.
2. Select Bluetooth.
3. Select Bluetooth Connection .
4. Select Connect next to the
desired phone.
CONNECTING YOUR PHONE
On the radio:
1. Push the SETUP button.
2. Select Bluetooth.
3. Select Bluetooth Connection .
4. Select Add New.
In your phone’s
Bluetooth settings:
5. Select the <Vehicle Name>
on your phone.
6. Enter the passkey from the
radio or accept the authorization
pop-up on your phone.
For more information, visit
HyundaiBluetooth.com
Using Voice Command:
“Change Bluetooth device”
☐ CONFIRM “GOOD BATTERY” USING GR8 AND STAPLE
TEST TICKET HERE
☐ SET TIRE PRESSURE LF RF RR LR
☐ VERIFY VEHICLE IS CLEAN, IN GOOD CONDITION,
FREE OF CHIPS AND SCRATCHES · CLEAN WINDSHIELD
AND BACK WINDOW
☐ ENSURE FLOORMATS ARE SNAPPED INTO PLACE
BEFORE DELIVERY
WALK THE CUSTOMER THROUGH EACH OF
THE FOLLOWING KEY DELIVERY FEATURES
Please refer to your Owner's Manual for more information.
CRUISE CONTROL/SMART CRUISE CONTROL
2
3
1
4
Setting Vehicle Distance
(Smart Cruise Control only)
The Cruise Control system allows
you to program the vehicle to
maintain a constant speed without
holding the accelerator pedal.
1
2
This system assist you in setting the
distance from the vehicle ahead and
will maintain the selected distance
without you depressing the accelerator
or the brake pedal.
1
To turn On/Off cruise control.
2
Toggle switch UP to Resume or
Increase the cruise control speed.
3
Toggle switch DOWN to Set or
Decrease the cruise control speed.
4
To Cancel the Cruise Control.
Press the button to set and maintain the
vehicle-to-vehicle distance without pressing
the accelerator or brake pedal.
The vehicle-to-vehicle distance
1
will
automatically activate when you set the
cruise speed
2
.
Each time the button is pressed, the vehicle-
to-vehicle distance changes as follows:
Distance 2
Distance 3Distance 4
Distance 1
Setting Cruise Control
1. Press the “CRUISE” button
1
to turn on Cruise Control. The icon will
illuminate in the instrument cluster.
2. Toggle “-SET” switch (3) DOWN to set cruising speed.
Adjusting the vehicle speed
1. Toggle “+RES” switch
2
UP to increase cruising speed.
2. Toggle “-SET” switch
3
DOWN to decrease cruising speed.
Note: Quick toggle up/down will change speed by 1 mph. Holding
switch up/down will change speed by 10 mph.
To Cancel Cruise Control
Press the “CANCEL” button
4
or depress the brake pedal.
LEADING VEHICLE DEPARTURE ALERT (if equipped)
The Leading Vehicle Departure Alert system alerts the driver of the
departure of the vehicle in front when the vehicle is stopped and the
Smart Cruise Control (SCC) is in activation.
To activate
Select the following items on the instrument cluster in order:
1. Select User Settings on the cluster LCD display.
2. Select Driver Assistance
3. Select Driving Assist
4. Select “Leading vehicle departure alert
The system stops operation when the setting is deactivated.
However, if the engine is turned off then on again, the system
maintains in the previous state.
☐ REVIEW QUICK REFERENCE GUIDE
☐ BLUETOOTH
- Show phone compatibility website:
www.hyundaiusa.com/bluetooth
- Pair customer's phone to the Bluetooth system (if equipped)
- Make a test call using Bluetooth with the customer’s phone
- Demonstrate Voice Recognition (VR)
☐ OPERATION OF THE NAVIGATION SYSTEM (if equipped) - page 25
☐ REVIEW AND TEAR OFF VOICE COMMAND / QUICK TIP CARD
☐ OPERATION OF THE AUDIO SYSTEM - page 24
☐ VEHICLE SETTINGS
- Demonstrate vehicle settings in instrument cluster
- Demonstrate navigation use, enter dealer address
- Show radio presets

Hyundai SANTA FE 2020 Specifications

General

Brand	Hyundai
Model	SANTA FE 2020
Category	Automobile
Language	English