6. Install the 1U blank filler panel 1 on the front of the rack cabinet at the same
U level as the Rack PDU. Use two M6 screws that come with this option.
Cabling your PDUs
Cable routing differs between horizontal and vertical Rack PDU installations. Refer
to “
Cabling instructions for vertical-mount PDUs” on page 164 or “Cabling instructions
for horizontal-mount PDUs” on page 140 as appropriate for your installation.
Figure 68. Installing the Rack PDUs and the blank filler panel
162 Hardware Maintenance Manual: IBM PC Server/Enterprise Racks Types 9306, 9308
To Next Page
Loading...
Need help?
General