To Next Page

To Previous Page

NetBAY3E enclosure

Features

The IBM NetBAY3E enclosure provides a convenient 3-U high by 28-inch deep

storage cabinet for the installation of computer devices.

Note: Vertical measurements are given in rack units (U). One U is equal to 4.45

cm (1.75-inches).

Up to three NetBAY3E enclosures can be stacked under certain IBM servers.

Devices such as the IBM EXP10, an uninterruptable power supply (UPS), or various

telecommunications equipment can also be installed in a NetBAY3E enclosure.

Important:

v The maximum server weight is 77 kg (170 lb.).

v Refer to the latest IBM Server Hardware Maintenance Manual when

servicing the server.

v Assure all power and signal cables are routed properly and are not

pinched.

v Make sure NetBAY3E enclosures in a stack are securely fastened

together.

v Make sure empty NetBAY3E enclosures (no devices installed) have

the rear cover securely attached.

v Servers are lifted onto and off of the NetBAY3E enclosure. Make

sure you have help when lifting.

Locations

The following sections contain information on specific equipment locations.

Casters

v Two fixed casters 1at the front of the NetBAY3E enclosure.

v Two swivel casters2 at the rear of the NetBAY3E enclosure.

IBM 9306 User Manual

Questions and Answers: