Feature codes for power cords
Use these feature codes when you order power cords for your base or expansion
model. Each feature code represents two power cords.
Table 34 provides the power cord feature codes and associated wire gauges for the
DS8000 models. The “Power connector requirements” on page 162 topic provides
requirements for each power cord.
Table 34. Power cord feature codes
Feature Code Power Cord Type Wire Gauge
1060 Single-phase dual power cord for U.S., Canada,
Latin America, and Asia Pacific
10 mm²
1067 Single-phase dual power cord for Europe,
Middle East, and Africa
6mm²
1070 Top exit single-phase dual power cord for U.S.,
Latin America, Canada, and Asia Pacific
(available for only Model 951 business class
feature)
10 mm²
1071 Top exit single-phase dual power cord for
Europe, Middle East, and Africa (available for
only Model 951 business class feature)
6mm²
1090 Three-phase dual power cord for U.S., Canada,
Latin America, and Asia Pacific
10 mm²
1091 Three-phase dual power cord for Europe,
Middle East, and Africa
6mm²
1092 Three-phase dual power cord for U.S., Canada,
and Japan
10 mm²
1095 Top exit power cord for U.S., Canada, Latin
America, and Asia Pacific (available for only
Models 951 and 95E)
10 mm²
1096 Top exit power cord for Africa (available for
only Models 951 and 95E)
6mm²
1097 Top exit power cord for U.S., Canada, and
Japan (available for only Models 951 and 95E)
10 mm²
Note: Single-phase power is supported on Models 941 and 94E and Model 951
business class feature. To inquire about single-phase power support on your
existing models, contact your IBM marketing representative.
Table 35. Additional feature codes for top exit power cords
Feature Code Installation Item
1101 Universal ladder for top exit cable access
Note: At least one universal ladder (feature code 1101) per customer site must be
ordered when a top exit power cord is ordered.
Input voltage
The DS8000can support voltages that range from 200 V ac to 480 V ac (180 V ac
min to 508 V ac max) automatically.
Chapter 4. Storage unit physical configuration 115
To Next Page
Loading...
Need help?
General