Table 46. Remote mirror for System z (RMZ) feature codes
Feature code Description Hardware models
7650 RMZ - Inactive
941, 951
7651 RMZ-1TBunit
7652 RMZ-5TBunit
7653 RMZ - 10 TB unit
7654 RMZ - 25 TB unit
7655 RMZ - 50 TB unit
7660 RMZ - 100 TB unit
Feature codes for z/OS Metro/Global Mirror Incremental
Resync (RMZ Resync)
When you order the z/OS Metro/Global Mirror function, you specify the feature
code that represents the physical capacity to authorize for the function.
Note: If you are activating features for any of the licensed functions, such as Copy
Services, all the features must have the same capacity, including the
operating environment license feature.
You can combine feature codes to order the exact capacity that you need. For
example, if you determine that you need 30 TB of capacity, you would order one
7684 feature and one 7682 feature.
Note: If you have an active z/OS Metro/Global Mirror feature and replace it with
an inactive feature, “Managing a licensed feature” on page 187 provides
information should you decide to use the feature again.
Table 47 provides the feature codes for z/OS Metro/Global Mirror Incremental
Resync (RMZ Resync) System z functions.
Table 47. z/OS Metro/Global Mirror Incremental Resync (RMZ Resync) for System z feature
codes
Feature code Description Hardware models
7680 RMZ resync - Inactive
941, 951
7681 RMZ resync-1TBunit
7682 RMZ resync-5TBunit
7683 RMZ resync - 10 TB unit
7684 RMZ resync - 25 TB unit
7685 RMZ resync - 50 TB unit
7690 RMZ resync - 100 TB unit
z/OS Distributed Data Backup
z/OS Distributed Data Backup (zDDB) is an optional licensed feature on Model
941 that allows hosts, attached through a FICON or ESCON interface, to access
data on fixed block (FB) volumes through a device address on FICON or ESCON
interfaces.
Chapter 5. Use of licensed functions 135
To Next Page
Loading...
Need help?
General