Table 42. Point-in-time copy (PTC) feature codes
Feature code Description Hardware models
7250 PTC - Inactive
941 , 951
7251 PTC - 1 TB unit
7252 PTC - 5 TB unit
7253 PTC - 10 TB unit
7254 PTC - 25 TB unit
7255 PTC - 50 TB unit
7260 PTC - 100 TB unit
Feature codes for FlashCopy SE
When you order FlashCopy SE function, you specify the feature code that
represents the physical capacity you want to authorize for the function.
The FlashCopy SE license feature codes enable the use of the FlashCopy SE
licensed function.
Note: If you are activating features for any of the licensed functions, such as Copy
Services, all the features must have the same capacity, including the
operating environment license feature.
You can combine feature codes to order the exact capacity that you need.
Note: If you have an active FlashCopy SE feature and replace it with an inactive
feature, “Managing a licensed feature” on page 187 provides information for
future use of this feature.
Table 43 provides the feature codes for the FlashCopy SE function.
Note: If you have an active FlashCopy SE feature and replace it with an inactive
feature, see “Managing a licensed feature” on page 187 for information
about using the feature again.
Table 43. FlashCopy SE feature codes
Feature code Description Hardware models
7350 SE - Inactive
941, 951
7351 SE-1TBunit
7352 SE-5TBunit
7353 SE - 10 TB unit
7354 SE - 25 TB unit
7355 SE - 50 TB unit
7360 SE - 100 TB unit
Chapter 5. Use of licensed functions 131
To Next Page
Loading...
Need help?
General