80
Updated
28/02/01
To access IBM information specific to your country via the World Wide Web, use address: http://www.ibm.com/pc
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers,
access the IBM ServerProven compatibility pages on the Web at URL http://www.ibm.com/pc/us/compat
Netfinity 7600 Tape Options
Part
Number
Tape Drives Bays
Supported
SCSI
Interface
(bit)
Form
Factor
Termination
Included
68/50-pin
Converter Incl.
Ext. Tape
Enclosures
1
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive 1, 2 16 Ultra2 LVD
89 mm
(3.5”) HH
or 133 mm
(5.25”) HH
NN/A
10L7440
2
,
03K8756
1
00N7990 40/80 GB DLT Internal SCSI Tape Drive 1+2 16 Ultra2 LVD
133 mm
(5.25”) FH
N N/A
03K8705
2
,
03K8756
1
00N8017 60/120GB 8-mm M2 SCSI Tape Drive 1, 2 16 Ultra2 LVD
133 mm
(5.25”) HH
NN/A
10L7440
2
,
03K8756
1
Tape Autoloaders
00N79xx
8
DLT Tape Autoloader N/A 16 Desktop Y N/A -
00N7992 120/240GB DOS/4 Tape Autoloader 1+2 16 Ultra2 LVD
133 mm
(5.25”) FH
N N/A 03K8756
1
External Tape Libraries
3
00N79xx
9
DLT Tape Library - 16
Desktop or
Rack
Y - -
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
4
- 8/16 Desktop N N -
03K8705 DLT External SCSI Enclosure
5
16 Desktop N N -
03K8756 NetMEDIA Storage Expansion Unit EL
6
- 16 Rack Y N -
10L7113 NetMEDIA Systems Management Adapter
7
- 16 LVD - N N 03K8756
Associated Options
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
- 16 LVD/SE Ext. Y N
10L7440,
03K8705
10K2340 Media BayTray and LVD Cable Kit
1
- 16 LVD Int. Y N 03K8756
Note: Netfinity 7600 includes a two-drop multimode terminated LVD SCSI cable, an available internal Ultra2 SCSI port and an external Ultra2 0.8-mm VHDCI connector.
1. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 03K8756) requires replacement of the standard single-ended internal cables with one or more (depending on
configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode LVD-SCSI terminated cable. If the standard cables are used for attachment to LVD
devices, single-ended SCSI rules and bus speeds apply.
2. Requires 68-pin External Multimode LVD/SE SCSI terminator P/N 00N7956.
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin External
Multimode LVD/SE SCSI Terminator P/N 00N7956.
5. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI terminator
P/N 00N7956.
6. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack or NetBAY3/3E mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm
(5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also
included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a Rack Cabinet P/N 930842X.
7. NetMEDIA Systems Management Adapter P/N 10L7113 may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters
when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
8. Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.
9. Where ‘xx’ represents a country specific power cord code:
Rack versions - 81=EU1, 82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
Note: Additional tape details can be found in Appendix A: Tape Drive Attributes.