IBM iSeries Series Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
0A17 A permanent I/O processor failure occurred IOP
MA_BRDG
AJDGP01
AJDG301
0A22 I/O processor detected a storage transfer error AJDGP01
AJDG301
IOP
MA_BRDG
102E Out of alternate sectors for disk storage FI01105
1307 I/O processor resource not available AJDGP01
AJDG301
1310 I/O processor resource not available
The I/O processor error log is being filled faster than the errors are being
reported to the system. Check other errors reported to the system and
correct them.
1317 I/O processor card error
Display the Service Action Log entry for this SRC. If the Failing Item
indicates IOP, then replace the IOP. If the Failing Item indicates SVCDOCS,
then do NOT replace the IOP. This is a recoverable error. Perform the
following:
1. If the I/O Processor is not operable and disk units are attached, use
Hardware Service Manager to re-IPL the IOP. Other resources attached to
the IOP may then need to be Varied On.
2. If disk units are not attached, perform the VRYCFG RESET(*YES)
command to reset the IOP and Vary On attached resources.
SVCDOCS
2200 I/O processor Licensed Internal Code error AJDGP01
2201 Removable media error during IPL USER
FI01105
2202 Removable media error during IPL FI00022
FI01105
3000 A permanent I/O processor failure occurred FI01101
IOP
MA_BRDG
3001 Not valid condition in I/O Processor Licensed Internal Code
The Licensed Internal Code found a condition that should not have
occurred.
IOP
AJDGP01
3002 Addressed device failed to respond to selection
Perform SDIOP-PIP16.
FI01105
STORIOA
FI01140
FI01141
FI01106
3006 System bus error IOP
ANYBUS
FI01101
3020 I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 0. To correct or isolate a possible user error or
configuration error, perform SDIOP-PIP17. Use the failing item (FI) codes to
find failing devices.
USER
FI01107
STORIOA
2749, 2767, 2768, 2842, 2843, 2844, 284B, 284C, 284D, 284E, 286C, 286D, 286E, 286F, 5702
146
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)

IBM iSeries Series Specifications

General

Brand	IBM
Model	iSeries Series
Category	Server
Language	English