IBM iSeries Series Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
9092 Disk unit requires initialization before use.
Perform SDIOP-PIP26.
SVCDOCS
9093 Read cache device not in correct format
Contact your next level of support.
SVCDOCS
B934 Incompatible hardware detected. STORIOA
FF3D I/O adapter detected recoverable error STORIOA
ANYBRDG
FF6D I/O processor detected a recoverable system bus error IOP
ANYBUS
Table 2. Failing Items Details
Failing Item Description Document Description
AJDGP01 I/O processor Licensed Internal Code Service Functions; APAR or LICTR
ANYBRDG System I/O bus or any attached card Problem Analysis; Symbolic FRU Isolation
ANYBUS IOP card bus error Problem Analysis; Symbolic FRU Isolation
BACKPLN Card Enclosure or Planar Board Problem Analysis; Symbolic FRU Isolation
CACHBAT Cache battery pack Problem Analysis; Symbolic FRU Isolation
DEVBPLN Device backplane Problem Analysis; Symbolic FRU Isolation
DEVTERM Terminating plug Problem Analysis; Symbolic FRU Isolation
IOP I/O processor card Problem Analysis; Symbolic FRU Isolation
PCIBUS Any PCI card on the PCI bus Problem Analysis; Symbolic FRU Isolation
STORIOA Storage I/O adapter Problem Analysis; Symbolic FRU Isolation
SVCDOCS Customer engineer directed to system problem
analysis
Problem Analysis; Symbolic FRU Isolation
USER System Operator/User Problem Analysis; Symbolic FRU Isolation
(2749, 2767, 2768, 2842, 2843, 2844, 284B, 284C, 284D, 284E, 286C,
286D, 286E, 286F, 5702) Reference Codes
1. If the error is reported on the control panel, the unit reference code is
characters 5 through 8 of the top 16 character line of function 11. If the error is
reported on the console, the unit reference code is the 4 rightmost characters of
word 1.
2. Find the unit reference code in the following table.
Attention: The 673x is a read cache. Perform all actions required for 673x as a
disk drive and logic card except where separate 673x cache instructions are
provided.
For more on the Failing Item column entries, see Table 2. Failing Items Details,
which follows the reference code table below.
Table 1. (2749, 2767, 2768, 2842, 2843, 2844, 284B, 284C, 284D, 284D, 284E, 286C,
286D, 286E, 286F, 5702) Reference Codes
2748, 2757, 2763, 2778, 2782, 5703
System Reference Codes 145

IBM iSeries Series Specifications

General

Brand	IBM
Model	iSeries Series
Category	Server
Language	English