IBM iSeries Series Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
9289 Invalid Packet Length for data sent.
Invalid Packet Length occurred for data exchanged.
AJDG301
TWRCARD
C62E SPCN Network Fault
An SPCN frame-to-frame communication failure was detected.
SRNPU or POSORMU.
TWRCARD
CBLALL
CB15 EEPROM Failure TWRCARD
Table 2. SPCN failing items for Models 800, 810, and 825
Failing Item Description Document Description
ACMODUL AC Module Problem Analysis; Symbolic FRU Isolation
AIRMOVR Fan and Blower assemblies Problem Analysis; Symbolic FRU Isolation
AJDG301 Vertical Licensed Internal Code. Service Functions; APAR or LICTR
ALTMANL Alternate Manual Required Problem Analysis; Symbolic FRU Isolation
BACKPLN Back Plane Unit Problem Analysis; Symbolic FRU Isolation
BATCHGR Battery Power Unit Charger Problem Analysis; Symbolic FRU Isolation
BATRY Battery Power Unit Problem Analysis; Symbolic FRU Isolation
CBLALL Cable Failure Problem Analysis; Symbolic FRU Isolation
CTLPNL Control Panel Problem Analysis; Symbolic FRU Isolation
I2CBUS I2C Bus Part Problem Analysis; Symbolic FRU Isolation
IDPART Vital Product Data Parts Problem Analysis; Symbolic FRU Isolation
PGDPART Power Good Part Problem Analysis; Symbolic FRU Isolation
PWROC Power Supply overcurrent Problem Analysis; Symbolic FRU Isolation
PWRREG Regulator. Problem Analysis; Symbolic FRU Isolation
PWRSPLY Power Supply Problem Analysis; Symbolic FRU Isolation
SVCPROC Service Processor Card Problem Analysis; Symbolic FRU Isolation
TWRCARD Card enclosure or backplane Problem Analysis; Symbolic FRU Isolation
UPSUNIT UPS unit part Problem Analysis; Symbolic FRU Isolation
VPDPART VPD Communication Part Problem Analysis; Symbolic FRU Isolation
(1xxx) SPCN Reference Codes for Models 830, 840, SB2, and SB3
For details on the Failing Item column entries, see the SPCN Failing Items Detail
table, which follows the Reference Code table below.
Note: On Models 840/SB3, the C in the SRC (1xxC xxxx) indicates that the failure
is on the processor frame, not on the FC 9079 Base I/O Tower.
Table 1. SPCN reference codes for Models 830, 840, SB2, and SB3:
1xxx
68
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference Codes)

IBM iSeries Series Specifications

General

Brand	IBM
Model	iSeries Series
Category	Server
Language	English