IBM iSeries Series Analyze Hardware Problems (System Reference Codes

For more on the Failing Item column entries, see Table 2. Workstation Adapter
Console Failing Items Details, which follows the reference code table below.
Table 1. (6A59) Workstation Adapter Console Reference Codes
Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
0AD2 to 0AD3 Communications adapter card test failed FI00718
0B25 Communications adapter card test failed FI00719
FI00718
FI00727
0BA0, 0BAB, 0BB0,
0BD0 to 0BD1
Communications adapter card test failed FI00719
FI00718
0BEE I/O card Licensed Internal Code ended abnormally FI00719
FI00718
0C10 Communications adapter card test failed FI00719
FI00718
FI00727
0C20 Communications adapter card test failed FI00719
FI00718
0C30 Adapter card failed modem interface test FI00719
FI00718
0C40, 0C43 Synchronous-data-link-control send-receive test failed FI00719
FI00718
0C50, 0C53 Binary synchronous control send-receive test failed FI00719
FI00718
0C60, 0C63 Asynchronous send-receive test failed FI00719
FI00718
0C70, 0C80 Communications adapter card test failed FI00719
FI00718
0C90 Communications adapter card X.21 test failed FI00719
FI00718
0CA1, 0CC0 Communications adapter card test failed FI00719
FI00718
5007 Diagnostic wrap test completed; no errors detected
5008 Diagnostic wrap test completed; error was detected FI00719
DPAC
FI00718
FFFF User suspected communications problem. UNAUPPR
Table 2. Workstation Adapter Console Failing Items Details
Failing Item Description Document Description
DPAC Communications two-port adapter cable Problem Analysis; Symbolic FRU Isolation
UNAUPPR User suspected problem
(7208) Tape Drive Reference Codes
An 8mm tape drive failure occurred.
Note: For tape device and IOP reset procedures, see TU-PIP4.
6A59
System Reference Codes 181

IBM iSeries Series Specifications

General

Brand	IBM
Model	iSeries Series
Category	Server
Language	English