Reference Code Priority Description Failing Item
C010 to C01F,
C020 to C027,
C100 to C101,
C110 to C111,
C120 to C121
Low Memory Card ANYMEM
CA03 to CA06 Low Contact your next level of support NEXTLVL
CB00 to CB03,
CB10 to CB17,
CB20 to CB27,
CB30 to CB37
Low I/O Port RIOPORT
CBE0 Low I/O Port
See the Locations section for the model on which you
are working. The HSL I/O Bridge card in the base I/O
tower may have failed.
RIOPORT
CBF0 to CBFD Low I/O Port RIOPORT
CC03 Low Processor Card ANYPROC
CC09 Low Memory Card ANYMEM
CC0A Low I/O Port CCIN
CC10 to CC13 Low Configuration Mismatch PROCMM
CCA5 Low Configuration Mismatch
Check the locations section for the system on which
you are working for base system components and
processor and memory configuration rules. If the
problem is not corrected, contact your next level of
support.
NEXTLVL
CCA6 Low Invalid memory configuration NOMSUSE
CCA9 Low Invalid memory configuration MEMCFG
CD00 to CD0F Low Processor Cache Card CCIN
CEA0 to CEA2 Low Code Error PROCODE
CEA4 Low Contact your next level of support NEXTLVL
CEAF Low Code Error PROCODE
CEB0 Low I/O Port JTPORT
CEB1 to CEBC Low I/O Port PRCLINE
CEE1 to CEE2 Low Code Error PROCODE
CEE5 Low Contact your next level of support NEXTLVL
PROCODE
(B437) System Processor Reference Codes
The system processor detected a failure.
Note: This procedure applies only to system Models 830, and SB2.
Collect data from Functions 11, 12, and 13 of the system panel, or words 1 through
9 from the Main Store Dump (MSD) screen. This SRC, beginning with ″B4″, may
B428, B448
248
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
To Next Page
Loading...
Need help?
General