Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
C62E SPCN Network Fault
An SPCN frame-to-frame communication failure was detected.
SRNPU or POSORMU.
TWRCARD
CBLALL
C701 to C703 SPCN Frame-to-Frame Communication fault TWRCARD
CBLALL
CB00 Unknown box ID
The SPCN node cannot determine the machine type of the box in which it
is installed.
TWRCARD
BACKPLN
CB05 to CB06 AC Module Failure
The SPCN ROS and EPROMs test failed.
ACMODUL
CB1D AC Module Failure
The LCD test failure was detected on an Extension/Expansion Unit.
ACMODUL
17G0573
CC00 AC Module Failure
An unknown fault was detected. The machine failed to power up.
ACMODUL
FI00065
BKSPCN
CD00 No Power Supplies Present
SPCN cannot detect any power supplies installed.
BKSPCN
PWRSPLY
CE18 Regulator Not Present
No regulators can be found.
If the regulators are installed, exchange the failing items.
PWRREG
ACMODUL
CE1A Regulator Not Present
If regulator 3 in slot R03 is installed, exchange the failing items.
PWRREG
BKSPCN
D001 A Battery Power Unit 1 Failed
A response was received from battery power unit 1 charger that was not
valid.
86G8020
ACMODUL
BACKPLN
D002 Battery Power Unit 2 Failed
A response was received from battery power unit 2 charger that was not
valid.
86G8020
ACMODUL
BACKPLN
D101 A Battery Power Unit 1 Failed
Battery power unit 1 capacity test failed.
86G8040
86G8020
D102 Battery Power Unit 2 Failed
Battery power unit 2 capacity test failed.
86G8040
86G8020
D110 Battery Power Unit 1 and 2 Failed
Replace both batteries.
BATRY
D201 A Battery Power Unit 1 Failed
Battery power unit 1 charging fault was detected.
86G8020
86G8040
D202 Battery Power Unit 2 Failed
Battery power unit 2 charging fault was detected.
86G8020
86G8040
1xxx
54
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference Codes)
To Next Page
Loading...
Need help?
General