IBM iSeries Series Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
9114 Frame SPCN node is reporting load damaged.
The Licensed Internal Code for a SPCN node is damaged. The reload failed
because the code could not be found.
TWRCARD
9115 SPCN Command rejected by the Service Processor.
The service processor rejected an SPCN command from the Licensed
Internal Code.
No action required. This reference code is logged for information only.
9116 SPCN - Control Panel interface failure.
The SPCN to control panel interface is not working.
9117 SPCN - Control Panel interface is now working.
The SPCN to control panel interface is now working.
No action required. This reference code is logged for information only.
91DD All SPCN Downloads Complete
9212 Frame Address field not valid.
A Licensed Internal Code command had a frame address that is not valid.
Exchange the failing items for the failing node.
TWRCARD
9213 Invalid Address status, secondary node.
The address in the SPCN command does not match the assigned address of
the secondary node.
Exchange the failing items for the failing node.
TWRCARD
9214 Invalid Address Mode status
Invalid Address Mode occurred during Frame Command processing.
TWRCARD
AJDG301
9215 Invalid Frame Command status
Invalid Frame Command occurred during Frame Command processing.
TWRCARD
AJDG301
921B System Unit SPCN Port Fault status.
System Unit Port Fault occurred during Command processing.
TWRCARD
AJDG301
922B Address Unassigned status
A secondary node has no address assigned during Command processing.
TWRCARD
AJDG301
9231 Frame-to-Frame Communications Failure
A frame-to-frame communications failure occurred during STF processing.
TWRCARD
CBLALL
9232 Intrarack Communications Failure
An SPCN secondary node to frame communications failure occurred
during Command processing.
TWRCARD
CBLALL
9233 Intrarack Communications Failure
An SPCN frame to secondary node communications failure occurred
during Command processing.
TWRCARD
CBLALL
1xxx
66
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference Codes)

IBM iSeries Series Specifications

General

Brand	IBM
Model	iSeries Series
Category	Server
Language	English