IBM Storwize V5010 User Manual

614 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
10.10.5 Renaming remote copy relationship
Complete the following steps to rename a remote copy relationship:
1. From the main navigation pane, select Copy Services → Remote Copy.
2. In the table, select the remote copy relationship mapping that you want to rename. Click
Actions → Rename, as shown in Figure 10-126.
Figure 10-126 Rename remote copy relationship action
3. In the Rename Relationship window, enter the new name that you want to assign to the
FlashCopy mapping and click Rename, as shown in Figure 10-127.
Figure 10-127 Renaming a remote copy relationship
10.10.6 Moving stand-alone remote copy relationship to Consistency Group
Complete the following steps to move a remote copy relationship to a Consistency Group:
1. From the main navigation pane, click Copy Services → Remote Copy.
2. Expand the Not in a Group column.
3. Select the relationship that you want to move to the Consistency Group.
Tip: You can also right-click a remote copy relationship and select Rename.
Remote copy relationship name: You can use the letters A - Z and a - z, the numbers
0 - 9, and the underscore (_) character. The remote copy name can be 1 - 15
characters. No blanks are allowed.

IBM Storwize V5010 Specifications

General

Brand	IBM
Model	Storwize V5010
Category	Storage
Language	English