v 1 10 Gbps Ethernet port 3 which is the left port.
v 2 10 Gbps Ethernet port 4 which is the right port.
Table 15. Ethernet connections available with the control enclosure
Item Port Purpose
IP address is
assigned by
InitTool Use
3 (left port,
Figure 37 on
page 48)
Built-in Ethernet
port 1
1 Gbps external
network
connection
Yes Management
and service port
for each canister,
optional iSCSI.
(The Storwize
V7000 control
enclosure must
be able to
communicate
over the network
with the file
modules.)
3 (right port
Figure 37 on
page 48)
Built-in Ethernet
port 2
1 Gbps external
network
connection
No Optional
management
and service port,
optional iSCSI
1 (Figure 38) Ethernet port 3
on a 2076-312 or
2076-324
10 GbE external
network
connection
No Optional iSCSI
2 (Figure 38) Ethernet port 4
on a 2076-312 or
2076-324
10 GbE external
network
connection
No Optional iSCSI
svc00733
1
2
1 2
Figure 38. 10 Gbps Ethernet ports on the rear of the Storwize V7000 enclosure
Chapter 2. Performing the hardware installation 49
To Next Page
Loading...
Need help?
General