■ Channel selection
Several types of channel selecting methods are available. They
may differ, according to your system set up.
Toselectadesiredoperatingchannel,dooneofthefollowing:
•Rotate[ROTARYSELECTOR].
•Pushoneofmemorychannelkeys,[MR-CH1]to[MR-CH4].
AUTOMATIC SCAN TYPE:
Selecting a channel is not necessary for this type. When turning the
power ON, the transceiver automatically starts scanning. Scanning
stops when a signal is received, and then the channel is set.
NOTE: If the Move to Priority A channel at Power ON function
(p. 17) is turned ON, the transceiver does not start scanning at
power ON, and the Priority A channel is automatically selected.
11
3
OPERATION
To Next Page
Loading...
Need help?
General
