■ Setting the microphone gain
Adjusts the microphone gain.
Rotate [VOL] to turn OFF the q
transceiver power.
Set [ROTARY SELECTOR] to w
any channel other than Chan-
nel 16.
While pushing and holding e
[Lower], rotate [VOL] to turn ON
the power and enter the micro-
phone gain adjustment mode.
Push [Upper] to increase, or r
push [Lower] to decrease the
microphone gain.
•Theadjustablerangeis1(mini-
mum) to 4 (maximum).
•A beep sounds after pushing
[Upper] or [Lower].
If the level is set on 1 or 4, a low
tone error beep sounds.
Therefore, you can determine the current level setting by the type
of beep that sounds.
Rotate [VOL] to turn OFF the power, then turn ON again to exit t
the microphone gain adjustment mode.
NOTE: This operation may not be available, depending on the
preprogramming. Ask your dealer for details.
INFORMATION: ✓
When using the VOX function, we recommend setting the micro-
phone gain to 3. However, you can adjust it to suit your operating
environment (including your headset performance).
15
3
OPERATION
[Upper]
[VOL]
[ROTARY SELECTOR]
[Lower]
To Next Page
Loading...
Need help?
General
